Al Aker Lighting LED Underwater 割引 Boat Light, 64W 10-30VDC (White 9000 Lumen & Blue 3360 Lumen LED Colour Options), Aluminium Bronze Body,Surface Mount
商品説明・詳細
送料・お届け
商品情報
全国送料無料。海外倉庫から国内に取り寄せますので、お届けまで2-3週間程度お時間頂いております。また、税関審査により、開封による外箱の損傷の可能性が稀にございますが、商品自体の品質は問題ございませんのでご安心ください。国内到着後に一度検品して発送させて頂きます。商品についてご不明な点がございましたら、「この商品について問い合わせ」ボタンからお気軽にお問い合わせください。(商品が電波法上の技術基準に適合する必要がある無線機器の場合:商品は並行輸入品でございますので、電波法上の技術基準に適合いたしません。日本国内で使用すると電波法に違反するおそれがありますのでご購入、ご使用には十分ご注意ください)英語名Al Aker Lighting LED Underwater Boat Light, 64W 10-30VDC (White 9000 Lumen & Blue 3360 Lumen LED Colour Options), Aluminium Bronze Body,Surface Mount for Boats, Yachts, Cruise Ships, Sailboat, TransomIP68 Waterproof design (IP68 CLASS III),Due to the friction force that occurs while the boat is in motion, the recommended application area for the product is the aft of the boat. Impact resistant special glass.It is resistant to the shipworm that may occur under the boat. It has a salt water resistant aluminium bronze body. Impact resistant special PC glass, never broke.High-Tech 3535 Ultra High Performans LED with high wattage. White and Blue LED colour options. 64W White LEDs 9000 lumens. 64W Blue LEDs 3360 lumens. Current 12V : 6.0A / Current 24V : 3.0A10-30VDC Driver. External Constant Current Led Driver in Junction Box. It has Aluminium Cooling Case.The Aker Underwater boat Light is resistant to the shipworm that may occur under the boat. It has a salt water resistant thermal resin body.Body assembly is practical. 0.3937in (14 mm) cable hole is drilled on the surface of the hull and the surface of the boat is mounted underwater1 piece LED Underwater Boat Light, 1 pieces Aluminium 10-30V DC. Driver, 1 pc user manual, 3 pcs 316L Stainless Steel Screws for light mounting and 2 pcs 316L Stainless Steel Screws for driverDo not use in waterless environment.説明: Product Dimensions Data Product Dimensions : Head Diameter 3,54 in (90 mm.) , Head Height 0,94 in (24 mm), Full Height 1,7 in (43mm) Product Weight : 0.920 pounds (0.417 kg.) Product Cable Dimensions : 6.56ft. (2 mt.) x 0,75 mm? Neopren RNF Cable Mounting Hole Diameter : 13/16” (20,65mm) 10-30VDC. Driver Dimensions : Lengh 3,54 in (90mm), Width 2,56 in (65mm), Height 1,7 in (43mm) Driver Weight : 0.6 pounds (0.269 kg.) Box Dimensions : Lengh 6,3 in (160mm), Width 4,72 in (120mm), Height 5,12 in (130mm) Box Weight : 1.63 pounds (0.741 kg.) Product Technical Data LED : 3535 CREE Driver : External Driver with Aliminium Cooling Case Supply Voltage Range : 10.5 - 31 V DC Max Current Draw 12/24V : 12V : 6.0A / 24V : 3.0A UWL401 Model product has 3535 White LED 64W 9000 Lumen 3535 Blue LED 64W 3360 Lumen Every LED has 562,5 lumen 120 degree LED Setup Always ensure that the vessel’s power source and battery are disconnected or isolated prior to installation A qualied professional should carry out both the electrical and mechanical installation. Install as minimum load water line 200-300mm (4"-12") for the best underwater illumination. Measure the position of the lights and mark carefully. The light must be mounted on a at (not curved) surface. For underwater installs mount on transom or side hull only. A hole will be drilled to allow the cable to be inserted; care must be taken to ensure there is unrestricted access inside the hull. When installing three or more lights, equal spacing 2.5’- 3’ is recommended to give a consistent light pool. The light is temperature sensitive and must not be located close to the exhaust outlet or other heat source. Before mounting the product on the body, clean the oil, dirt and other factors from the edges of the holes Drill a 0,8" (20 mm) diameter hole on the predetermined spot with the help of a punch.カテゴリー: 車両用ライト部品メーカー: AKBORU ELK. MALZ. LTD. CO,ブランド: Al Aker Lighting高さ: 15.7 センチ幅: 13.0 センチ奥行: 12.2 センチ重量: 0.8 Kg